Hobbywing Screen Remote (Suit for all the Hobbywing ESC)

01 Product Specification                                                                                              

02：Function and operating instructions                                                                                                 

  1) Power on

  Press “button A” on remote control for 1 second to power on. The remote control will vibrate shortly and enter into connection mode. OLED screen displays main interface or unconnected hint according to connection state. Then press the power button of skateboard for 0.2 second to enter into connection mode.

Note: The normal state after connection is that OLED screen displays main interface and indicator light of skateboard is constantly on.

2)  Power off

Manual off: Press “button A” for 2 seconds to power off (The skateboard cannot be powered off under speeding). The remote control vibrates shortly, press power button for 1 second to power off.  

Note: If the skateboard is powered off but the remote control is not powered off and in the state of connection, the screen of remote control displays not connected, and the remote control vibrates shortly to remind. If the remote control powers off in the state of connection, the skateboard will start to brake and power off after 5 minnutes of standstill.

Automatical off: The romote control and skateboard will power off automatically if not being operated within 5 minutes, if the skateboard is at rest.

3)  Connect and match(Have been matched well after leaving factory)

    Both of remote control and skateboard are powered off, first press button A for 5 seconds, the indicator light is red and flashes quickly, reminding enter into matching state, press “button A” for 5 seconds again, the screen displays matching and enter into  matching mode. The remote control displays matching successfully, with two short vibration and once long vibration means completing matching. After that, the red indicator light of skateboard is constantly on and can be used. After matching remote control, need to select speed, mileage unit and motor diameter, detailed operation method. Button B to switch option. Button A to confirm. The remote control will enter into main function interface after the second motor diameter chosen.   

4)  Battery indicator

    Battery indicator of remote of control: There are 5 grid power. After power on, if the battery of remote of control is less than 10%(It can be used for 30 minutes at most), the screen of remote control indicates that the power is less than 10%, with a double long vibration. When the battery is only 5%(It can be used for 15 minutes). The remote control reminds the battery is less than 5% again, with a double long vibration. When the battery is lower than safe voltage(3.4V) and connected with skateboard, if the skateboard stops, the remote control vibrates once and powers off automatically.

    Battery indicator of skateboard: There are 5 grid power. When the battery of skateboard is lower than 25%, the screen of remote control indicates the battery is lower than 25%, with a double long vibration. When the battery of skateboard is lower than 10%, the remote control will indicates the battery is lower than 10%, with a double long vibration. When the voltage is lower than safe voltage, close power output, brake immediately at this time.  

5)  Throttle/Brake control

Push forward “finger dial of throttle” to control forward. Pull backward “finger dial of throttle” to control brake.

Make sure the finger dial of throttle is in neutal position before power on, or else it will affect the use experience. The screen will remind to return throttle in neutral position if it is not when power on. Please operate as per instruction.    

6)  Switch direction of skateboard

    In the state of forward, double click “Button B”, the remote control will short vibrate once(short vibrate for 100ms, the same below), the direction icon changes to“Backward arrow”;

    In the state of backward, double click “Button B”, the remote control will short vibrate once, the direction icon changes to“Forward arrow”.

    Note: This operation will be valid when the throttle trigger is in neutral position(zero throttle) and the speed is less than 3km/h.   

7)   Gear switch

     Short press button B, the remote control switches to the next gear, with a short vibration. The gear icon will change accordingly.

    Note: This operation will be valid when the throttle trigger is in neutral position(zero throttle).  

8) Charging

① Charging remote control: When charging the remote control, it vibrates short. The remote control screen displays the charging progress in real time in the form of flowing water light;

Note: It can not be operated when charging the remote control. It will automatically power off after unplug the charging wire and short vibrate once.

② Charging battery of skateboard: When power off, the skateboard enters into charging state automatically if connects the charger. The red indicator light is on. When power on, connect the charger to enter into charging state, the red indicator light is on, it will automatically power off after unplug the charging wire.

Note: When in the state of charging, part of motor and ESC will stop working if the skateboard is not connected with remote control, or does not accept operation instruction.